foundation repair

Types of foundation repair

The kind of repair that is required will be determined by the nature of the soil, the climate, the construction of the foundation, and any extra issues that are present. Cracks in foundations that are not considered structural are often seen in a vertical or diagonal orientation. These cracks are formed by the expansion and contraction of the concrete that makes up the foundation. Horizontal fissures in the structure are formed by dirt that has settled and may be seen on the surface. In the course of the meeting, the foundation repair specialists at foundation repair wichita ks, you choose should be able to determine the root cause of the foundation issue and provide a proposal to you about how to address your specific circumstance.

Patches and sealants for masonry cracks

In certain cases, foundation cracks may be fixed by filling in the crack with patching material and then coating the patch with a waterproof masonry sealant. Because the foundation of your home supports the rest of the structure, it is essential to locate and fix cracks as soon as possible.

Sealants such as hydraulic cement, vinyl concrete, epoxies, silicone, or polyurethane are often used for the purpose of repairing tiny fractures. The depth of the fracture will determine the kind of mixture that must be applied. It is preferable to detect the issue early on and fix it in order to avoid water from penetrating the structure and causing more harm.

Slab Jacking

A technique known as slab jacking may be used to elevate concrete that is sinking or has become uneven. This method is also known as concrete lifting and slab levelling. Another name for it is mudjacking. This technique works very well for elevating porches, stairs, decks, walks, garage floors, and driveways. It’s also great for other little chores.

When the earth underneath moves or collapses, leaving empty spaces below, slab foundations may sink or tilt. This can cause structural damage. Repairing a house foundation that has settled requires specific knowledge of the local soil conditions as well as specialised equipment, both of which are only available to professionals.

Pilings made of pressed concrete

Pressed concrete pilings are long-lasting foundation piers that may be used for both exterior and interior repairs. Both pier-and-beam foundations and foundations made of concrete slabs may benefit from their utilisation. In order to establish stability, properly built pressed concrete piers need to be pushed deep into the ground; this is normally done at a depth of around 12 feet.

Piers made of poured concrete

During home restoration, poured concrete piers are pushed to a depth of around 10 feet, and it takes approximately 7 to 10 days for the foundation levelling to cure. Because pressed concrete pilings make use of precast concrete segments that are already cured at the time of installation, the installation process for poured concrete piers takes much longer than that of pressed concrete pilings.